manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 119

A-91

Chapter 6    Point-to-Point Protocol (PPP)

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Book A

.

Step 2: Edit the Annex Configuration File

Session Parameter Blocks (SPBs) are structures within the Annex
configuration file. SPBs enable an RA 6300 to handle calls properly.

Before editing the file, determine the following:

•

The type of calls that will be made to the RA 6300 (e.g.,
modem, V.120, and sync PPP).

•

If more than one type of call will be made to the RA 6300, then
the telephone number associated with the type of call.

•

Whether you intend to use one or all of the default SPBs
provided in the PRI section of the configuration file, disable one
or all of the default SPBs, or write your own set of SPBs.

See Configuring the PRI Interface, Global Ports, and Sessions on page
A-51, for detailed information on SPBs.

The following instructions describe how to enable and disable the default
SPBs that exist within the configuration file. These default SPBs will
handle modem, V.120, and PPP calls made to the RA 6300.

To edit the configuration file:

1.

Open the configuration file.

The configuration file is located in the install directory on the UNIX
load host (default filename is /usr/spool/erpcd/bfs/config.annex).
Use any system editor (e.g., vi, textedit) to edit the file.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands