Baumuller b maxx BM4400, Instruction Handbook Manual

Page: 100 / 360

Electrical data power modules
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
100
of 358
3.5
3.5.3 Electrical data BM444X power modules
BM444 3 -
XXX -
2 XXXX
BM444 4 -
XXX -
2 XXXX
BM444 5 -
XXX -
2 XXXX
BM444 6 -
XXX -
2 XXXX
9)
Rated input power
1)
41 kW 50 kW 64 kW 84 kW
Rated input current
1)
(I
eff
) 76 A 93 A 119 A 155 A
Input current, max. (I
eff
) 113 A 120 A 155 A 207 A
Rated DC link voltage
1)
(U
DC
) 540 V
DC
DC link capacity (internal) 1880

F 2350

F 3055

F 3760

F
DC link discharging time

(internal DC link capacity)
45 s
55 s 70 s 90 s
Output voltage
1)2)
(U
AC
) 3 x 0 V to 3 x 370 V
Output frequency at 4 kHz
10)
0 Hz to 450 Hz
Rated output current
1)4)5)7)12)
(I
AC
) at 4 kHz
3)
80 A 100 A 130 A 150 A
Rated output current
1)4)5)7)12)
(I
AC
) at 8 kHz
3)
75 A 72 A 94 A 105 A
Output peak current
1)4)6)7)12)
(I
AC
) at 4 kHz
3)
120 A 130 A 170 A 200 A
Output peak current
1)4)6)7)12)
(I
AC
) at 8 kHz
3)
90 A 94 A 130 A 150 A
Max. peak current period
7)
60 s
Power loss referring to the power input 800 W 1000 W 1300 W 1400 W
Power input referring to the control voltage max. 75 W
Power input of the device fan

referring to 230 V
AC
8)
87 W
Current of the integrated brake control max. 8.0 A
11)
Cooling air requirement power heat sinks 260 m³/h 210 m³/h
Cooling air requirement internal space 60 m³/h
.
1)
All rated values refer to a DC link voltage of 540 V
DC
and a control voltage of 24 V.
2)
The output voltage is a pulsed DC voltage. The operating range refers to the RMS of the fundamental wave.

U
AC
3 0 V to

3
U
DC
2
----------- 10 V –
 
 

= without overmodulation of the PWM.
3)
Switching frequency of the inverter (adjustable).
4)
RMS at an environmental temperature of 40 °C.
5)
The input current must be reduced between 40 °C and 55 °C. See correction factors at changed operating conditions Z Environmental
temperature – on page 57.
6)
The peak output current is supplied for the maximum peak current period for the motor at the first acceleration (cold power unit). The in
fact possible overload time is dependent on the preload of the device and on the heat sink temperature, it is determined by the overload
monitoring of the device.