Baumuller b maxx BM4400, Instruction Handbook Manual

Page: 124 / 360

Interconnect devices
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
124
of 358
4.3
4.3 Interconnect devices
The device is part of the Baumüller series b maXX BM4400, BM4600, BM4700 and can
be connected together with other Baumüller devices.
Because of the many possible combinations and of the many applications that can be op-
erated by
b maXX BM4400, BM4600, BM4700 , we have refrained from drawing up a
guide for the interconnection of the devices in written form. Please contact the for you re-
sponsible sales department or the for you responsible employees of the application de-
partment, to discuss your concrete questions on the requirements to develop together a
solution for your problem.
4.3.1 Mix mode BM443X generation 1 and 2
In principle, BM443X generation 1 and 2 can be operated in mix mode.
The prerequisites are:
n A waiting time of 6 s must be observed before the drive can be enabled (pulse enable,
enabling the torque)
n The total DC link capacity of all connected devices must be lower than 20 mF.
BM4-F-ENC-17 Sine-cosine encoder

module with SSI interface and
5 V power supply
5 V-sine-cosine encoder, output sig-
nals ~1Vss Baumer-Hüb-
ner
MHGA400
BM4-F-ENC-27 Encoder module with SSI
interface and

5 V power supply
SSI encoder with digital output sig-
nals and 24 V supply MTS-Sensors
Temposonics
BM4-F-ENC-08 Sine-cosine encoder

module with commutation and
zero-point sensing
5 V-sine-cosine encoder,

incremental signals ~1Vss,

commutation signals ~1 Vss
Heidenhain
ERN1185 Heidenhain
ERN1387
Identification Encoder module Encoder type Connectable encoders
examples
NOTE!
Read the version code to identify BM443X generation 1 or generation 2, refer to Z Ex-
planation version code – on page 130.
NOTE!
When replacing a BM443X generation 1 by a generation 2 device the fuses must be
adjusted as well, refer to
Z Fuses BM4X3X – from page 280.