Baumuller b maXX 3000, Instruction Handbook Manual

Page: 54 / 220

Identification of the device
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11 Baumüller Nürnberg GmbH
54
of 218
4.2
BM3XXX-XXXX-XXXXX[-X]- X XXXX[-S0X]-XX[-XX][-EXX][-#XX] Fieldbus interface
1: EtherCAT
®
CoE
2: VARAN
3: CANopen
®
4: POWERLINK
®
5: ProfiNET RT/IRT
7: EtherCAT
®
SoE
BM3XXX-XXXX-XXXXX[-X]-X X XXX[-S0X]-XX[-XX][-EXX][-#XX] Encoder interface
1: HIPERFACE
®
, EnDat
®
2.1, SSI,

square and sine incremental encoder,

resolver
2: EnDat
®
2.2

3: HIPERFACE DSL
®
BM3XXX-XXXX-XXXXX[-X]-XX X XX[-S0X]-XX[-XX][-EXX][-#XX] Digital inputs/outputs
1: 2 digital inputs/ 2 digital outputs
BM3XXX-XXXX-XXXXX[-X]-XXX X X[-S0X]-XX[-XX][-EXX][-#XX] Analog inputs/outputs
1: 1 analog input/ 2 analog outputs

signal bus for max.12 devices
2: 2 analog inputs/2 analog outputs

extended signal bus for max. 30 devices
BM3XXX-XXXX-XXXXX[-X]-XXXX X [-S0X]-XX[-XX][-EXX][-#XX] Option inputs/outputs
0: no
BM3XXX-XXXX-XXXXX[-X]-XXXXX[- S0X ]-XX[-XX][-EXX][-#XX] Kind of STO function optional

(only BM3300)
S00: Safety function STO

Note:

Not conform to Safety Standards.

Permitted for process protection only.

S01: Safety function STO according

Safety claim PLe / SIL3

(for replacement only)

S02: Safety function STO according

Safety claim PLe / SIL3

with short-circuit detection
BM3XXX-XXXX-XXXXX[-X]-XXXXX[-S0X]- XX [-XX][-EXX][-#XX] Incompatible controller software version
BM3XXX-XXXX-XXXXX[-X]-XXXXX[-S0X]-XX[- XX ][-EXX][-#XX] Option compatible controller software

version
BM3XXX-XXXX-XXXXX[-X]-XXXXX[-S0X]-XX[-XX][ -EXX ][-#XX] Software function option
BM3XXX-XXXX-XXXXX[-X]-XXXXX[-S0X]-XX[-XX][-EXX][- #XX ] Safety level option (only BM3300)
#00: Used for safety level STO