Operation manual for
BAUER RAINSTAR
Series T32, T42
29
MENU 3
PRESS SENSOR
█
STOP SENSOR
█
SPEED SENSOR
█
█
MOT1 0.0A MOT2 1.8A
PRESS SENSOR
Shows if the pressure is high.The marker is on when the water pressure is high.
The machine can only work when the pressure is high.
STOP SENSOR
Shows if the stop switch is activated. The marker is on when the stop switch is on.
The machine can only work when the stop switch is on.
The stop switch has three functions:
1: Resets the distance counter
2: Post-irrigation
3: Inhibits the pulses to the regulating motor.
SPEED SENSOR
Test speed sensor. The marker is on when the magnates activate the speed sensor.
MOT1, MOT2
Shows the current power consumption of the motor. The motor is stopped when the power
consumption exceeds 4,5 A. If the power consumption exceeds 4,5 A, and the motor has not
reached its end position the shut off valve is blocked.
MENU 4
ACTUAL SPEED 22M/H
START 0:00
WORKING HOURS 123h
ACTUAL SPEED
Shows the current speed of the machine. Furthermore, the maximum running speed of the machine
can be checked if the
ECOSTAR 4300
is set to a much higher speed than the machine can run.
The current speed can differ from the set speed, especially at the start. This is not an error because
the
ECOSTAR 4300
ensures that the medium speed over a distance of 10 m is correct.
START
With this function the starting time of the machine can be delayed for up to 24 hours.
To set the start time press „PROG“-key three times and the time can be set with the keys „
+“
and „
–
“
.
WORKING HOURS
The total working hour since the electronic was started for the first time.
