Operation manual for
BAUER RAINSTAR
Series T32, T42
65
12
SETTING TURBINE BRAKE
3
m
m
0
m
m
5 mm
26
ma
x
.
mm
B
B
0,1
m
m
DETAIL A
2:1
Schnitt B-B
1:1
1
2
3
4
A
5
6
7
8
1. Enclose a spacer of 3mm between segment (1) and end stop (2)
2. Set a distance of 5mm ( DETAIL A ) between the two nuts (3) on the threaded rod (4).
3. Then adjust the nuts (7) on the other side of the threaded rod (4) until the value “0” is reached
between breaking lever (5) and breaking wheel (6). Then secure the nut (7) with the second nut
(8).
4. Remove the spacer of 3mm between segment (1) and end stop (2).
13 STATIV
High construction of both symmetric and asymmetric wheel carts provides maximum crop protection
(asymmetric wheel cart OPTIONAL). With infinitely variable track width you can adapt the carts to crop row
spacings of over 3.0 m with the symmetric design, and up to 2.0 m with the asymmetric design.
For easier pulling the cart is fitted with a draw-out hook.
You pick up the cart at this hook with the tractor’s toolbar and pull off the PE-pipe.
For turning the pipe reel and placing the RAINSTAR in a new setting-up position, the cart must be in its end
position (raised).
Depending on the type of sprinkler, the nozzle height of the sprinkler is:
approx. 1860 – 1960
At the end of retraction the cart is lifted automatically. Owing to its pendulous mounting the sprinkler is not
tilted but always remains in the optimum position regarding distance of throw and distribution uniformity. This
pendulous mounting assembly compensates also slopes in the terrain in longitudinal direction
