Barudan BEXS, Instruction Manual

Page: 87 / 233

６‐４
The design information screen has the following contents.
Design No.
：
Memory location of the design
Design Name
：
Name of the design
Stitch Count
：
Total stitch count of the design
SIZE
：
Distance between the overall dimensions of the design measured in
tenths of millimeters.
PASS
：
Distance between the start and end points, shown as horizontal
and vertical values, measured in tenths of millimeters.
P
１ ：
Distance from the start point to the bottom left corner of the design,
measured in tenths of millimeters.
P
２ ：
Distance between the start point and the top right corner of the pattern
measured in tenths of millimeters.
V scale
：
”V scale” of the Program Settings.
H scale
：
”H scale” of the Program Settings.
Angle
：
”Angle” of the Program Settings.
A
：
Shows one of the icons shown below to indicate special conditions of the
design.
4. Press the A-key below the icon to show the Needle drop points of the selected
design.
Press the A-key below the icon again to go back to the previous display.
5. Press the C-key below the icon to show the design overview of before and after
of the Program changes.
* When the Program has not been changed, it is not displayed.
6. Press the G-key below the icon to change the design color.