Barudan BEXS, Instruction Manual

Page: 16 / 233

２‐４
9. Head Selection System
Sewing Head switches can be turned On/Off individually depending on Design data.
They can also be switched On/Off by programming on the Automat.
10. Stitch Length Adjuster
Swing parameter allows satin stitches to be automatically sewn slightly wider or narrower
depending on the setting. This feature is helpful sewing small lettering when they need to be
sewn with a bolder effect.
11. Automatic Appliqué Positioning
This feature moves the pantograph out to a programmed position, when the machine stops for
an appliqué to be applied. This allows the operator to easily apply the appliqués to the
garments. This can also be used for replacing frames at the end of sewing.
12. Socks
Automatic design conversion for socks.
13. Matrix Embroidery
Automatic layout for the Matrix embroidery.
Easy setting can create a repetition design.
14. The registration of the start position
The controller automatically saves the last start position of designs in memory. When you go to
sew a design a second time, you can start from this same position.
15. Trace
The controller can show the area to be sewn on the screen and by a four-point trace and outline
trace.
16. Stand-By (Resume)
The machine can be turned OFF in the middle of a design. When powered back On, the
machine resumes in the same position where the embroidery was stopped, even if the
pantograph was moved when the machine was powered off.