Barudan BEXS, Instruction Manual

Page: 179 / 233

１３‐６
Message
(Code)
Description Trouble shooting
A35 Spectacle Frame Error
Spectacle Frame is a special parameter in MC
parameters. When Spectacle Frame is turned On,
some machine operations are prohibited to protect
the machine. This is the error message given when
an operation is prohibited. If a spectacle frame is not
being used, turn this feature Off.
A36 Appliqué Error
When manual Appliqué feature is activated, you
cannot use the origin key. This is to prevent bending
the presser foot. Turn manual appliqué feature Off
to use the origin key.
A37 USB Memory Device is
Full
Delete some designs off of the USB Memory Device.
A38 No USB Memory Device
Inserted
1. Check that the USB Memory Device is inserted
correctly. If inserted OK and still getting error,
check Automat connector and/or try another
USB memory device.
2. If still a problem, check the internal CF memory
card and/or connection board. Make sure they
are not damaged or came loose.
A39 USB Read/Write Error
Retry using the USB memory or try another USB
memory device.
A40 Network Error
This error occurs when using Barudan’s DFS
(Design File Server) or LEM Networking Software to
connect to the machine. It means the machine is
disconnected from the network. Check that the cable
from the PC to this machine is connected properly
and not damaged. If OK, close the DFS or LEM
software and reopen and retry. If still a problem.
Reboot the computer and the machine to see if it
corrects the network error. If the problem is
intermittent, try re-routing the cable away from
other electrical power cables or try a shorter cable.
A41 Design Data Reading
Error
This error occurs when reading design data that is
made with a format problem or with wrong design
information header. Try reformatting the bad design
with digitizing/editing software or read another good
design.