Barudan BEVT Series, Instruction Manual

Page: 11 / 193

1. Specification
1) Design Capacity/Stitch Capacity : 30 designs /10 million stitches
2) Display : LCD 320 x 240 16bit Color LCD
3) Power Source : AC100V Single
AC200V Single
(+/-10%, 50/60Hz)
4) Power Consumption : 1KVA /Varies for each model
5) Temperature : 5 – 45 Degree Centigrade (Active)
-20 – 60 Degree Centigrade (Storage)
6) Humidity : 20 – 80 %RH, No condensation allowed
7) Grounding : Grounding resistance to be less than 100Ohm
(Type 3 grounding)
8) Main Motor : 200V AC Servo Motor
9) Pantograph Drive Motor : AC Servo Motor
10) Head Number : 1
11) Speed : 200 – 1200rpm
(Max Speed is defined for each model)
12) Needle Number : Max.15 (Sliding Head)
13) CF Card Slot : X 1
14) Trimmer Compatible : Mark 5
15) Thread Break Detection
16) USB Port : USB1.1 (USB Board required)
17) Networking System : Ethernet (Ethernet Board required)
18) COM Port : 9600 – 115200bps (COM Board required)
19) Capable to drive Cap Frames (Cylinder Bed Model)
20) Capable to drive borer
21) Compatible to Sequin Device (Factory Option)
22) Compatible to a Barcode Reader (Option)
23) Emergency Stop Switch (Factory Option)
2－2