Barudan BEVT Series, Instruction Manual

Page: 119 / 193

3. MC List
Item Function Range Default No.& Icon
1
0 –
Enter the number of the needle that
Borer 1
has the borer.
0 : No borer used Max Needle
No.
0
2
Controls the number of jump
Trim Jumps
stitches above which the thread
trimmer wil cut the thread.
0 : No trimming for jumps
0 - 9 2
Automatic lock stitches after a 3
trim. It converts first
Lock Stitch
stitch into the lock stitch.
1 : Split stitch
2 : Triangle stitch
3 : Reverse stitch
4 : No lock stitch
Add 10 to the values above to
create a stitch and converts it
into a lock stitches.
1 – 4 &
11 - 14
1
The thread clamp control when start
sewing after a trimming.
4
Clamp Type
1 : Opens for 1
st
stitch, Close at
the DBC. Opens for 2
nd
stitch.
2 : Opens for 2
nd
stitch
3 : Opens for 1
st
stitch
1 - 3 1
Controls the machine speed at the
start of sewing to 180 RPM for
these specified amount of stitches,
then ramps up to the normal sewing
speed. 5
Ｓｌｏｗ ｕｐ ｃｏｕｎｔ
3-15 3
0 : Trimmers off 6
1 : Moves the Pantograph 0.4mm to
right before trimming.
Trim Type
2 : Reverse the Pantograph then
trimming.
3 : Pull the thread with the Slider
then trimming as 1.
０～３
１１
11 : Same as 1 only the thread
behind the fabric is shorter.
1
11－5