Ａ４０：
Network broken.
Ａ４１：
The false loading of the design information.
Message
Description
Ｄ０１：
False Color Change due to the lock error of the
Color Change Turret. Manually turn the Turret.
Ｄ０３：
The Color Change Turret is not locked.
Manually turn the Turret.
Ｄ０４：
Needle Bar Positioner Error. Check the Board.
Unable to Color Change Check the Clamp/Jump
Ｄ０５：
Solenoid if there is no stuck.
Main Motor Trip.
Ｄ０６：
Try to restart the machine.
Turn OFF the power and check the bind by turning
the Main Shaft with hands.
Main Motor Overload.
Ｄ０７：
Turn OFF the machine and check the bind by
turning the Main Shaft with hands.
Pantograph Stroke Limit.
Ｄ０８：
Pantograph reached a Soft Limit in the MC
Parameters.
Ｄ０９：
Start/Stop error.
Rotary Encoder Error. Check if it is working
Ｄ１１：
properly.
Ｄ１２：
Slider Error. Move back the Slider to the
original position. Check if the trimming is OK?
Ｄ１３：
No further Stitch Back/Automending.
Ｄ１４：
Push the Start Switch.
Ｄ１６：
Bobbin break.
Ｄ１９：
Stop for the Stop Code.
The end of the Automending.
Ｄ２０：
14－4
Summary of Contents for BEVT Series
