Barudan BEVT Series, Instruction Manual

Page: 51 / 193

6) The B-Key toggles the Tape Code. *2
The D-Key toggles the data transmission speed. *3
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
7) Press the E-Key to start loading.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
8) Check if the device loading the design is ready.
*1 The automat chooses an empty Memory location automatically.
Delete a design to create an empty location if the Memory is full.
*2 The B-Key toggles the Tape Code as U
Æ F Æ EL. Other codes are not valid.
*3 the data transmission speed is chosen from the chart below.
The D-Key toggles the No. assigned to the speed.
No. Speed (bps)
０ ９６００ ×１
１ １４４００ ×１．５
２ １９２００ ×２
３ ２８８００ ×３
４ ３８４００ ×４
５ ５７６００ ×６
６ ７６８００ ×８
７ １１５２００ ×１２
3
-2. Merging a Design (COM)
Merging designs via the COM port.
1) Prepare the device sending the design.
2) Press the Menu Key to display “Menu 2” as below.
3) Press the A-Key .
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4) Press the A-Key to toggle the Device icons. Choose the COM icon.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
5－6