Barudan BEVT Series, Instruction Manual

Page: 120 / 193

Item Function Range Default No.& Icon
Sets the direction the pantograph
moves after a thread trim. 7
Trim Dir
0 : moves in the H direction
towards the machine origin to
avoid interference between the
frame and machine.
1 : moves in the V direction
towards machine origin.
0 or 1 0
8
Determines the distance the
pantograph moves, in mm, before a
trim.
Trim Vector
0 - 50 15
9
Low Speed
Selects the speed at which the
Low Speed function will operate.
200 –
Max .Speed
450rpm
10
Selects the maximum stitch length
Jump Divide
that the machine sews in a single
head revolution. A stitch longer
than the programmed value is
divided into two stitches.
30 -127 127
11
Controls the number of stitches
the machine will automatically
back up at a thread break. Stitch Back
0 – 7 st 4 st
12
Overlap
Designates the number of stitches
to overlap in automend.
0 – 7 st 4 st
If on, during automend, the
machine automatically starts all
heads withouth the operator
pressing the Green Start button
when the machine has sewn stitches
to mend. Use with caution!!
13 Auto Start
0 : Starts after the Automending
Stops after the Appliqué
0 - 3 1
Framing
1 : Stops after the Automending
Stops after the Appliqué
framing
2 : Starts after the Auto mending
Starts after the appliqué Framing.
3 : Stops after the Automending
Starts after the Appliqué framing.
11－6