Barudan BENS, Operation Manual

Page: 43 / 103

The function list lets you easily see a pattern’s
entire color sequence. Color codes can be
changed in the function list, instead of
searching and changing only one code at a time
with Teach. For information on Teach, see page
3-17.
The Function List screen shows the following
information:
•
Stitch number where each code is
located.
•
The Function code number - the
number in parentheses identifies the
corresponding needle number.
•
Total number of function codes in the
pattern.
Changing a Pattern’s Color Sequence from the Function List
1. Press the Memory softkey. The Pattern List displays, showing the
patterns stored in memory.
2. Use the jog keys to select a pattern. A box outline displays around
the selected pattern.
3. Press B, below the Pattern Characteristics icon, to open the Pattern
Characteristics screen.
4. Press D, below the Function List icon, to display the list of color
change functions in the pattern.
NOTE: The list displays up to 400 color change codes.
5. Use the jog keys to move through the list and select the code you want
to change. A box outline displays around the selected code.
2-12 Memory Operations BENS Operation Guide - 12/99
Memory
Softkey
Function List Screen