Barudan BENS, Operation Manual

Page: 84 / 103

5. Move the Start/Stop bar to the left or press the green Start Button to
begin sewing.
When the machine reaches the first
code, sewing stops and the Teach screen
displays.
The Teach screen shows the stitch
number where the code is located. The
code to the left of the arrow is the
current function code. The flashing code
to the right of the arrow indicates the
new code that will be assigned.
6.
Use the menu keys to change the code
as desired.
•
Press A, below the Previous Color
icon to select the code before the
flashing code.
•
Press B, below the Next Color icon to
select the code after the flashing code.
•
Press C, below the Stop icon, to insert a stop code (CØ).
The sewing head immediately rotates in the direction indicated when a
new color code is selected.
7. When the desired code is set, move the Start/Stop bar to the left or
press the green Start Button to continue sewing the pattern.
The machine stops at each subsequent code in the pattern. Repeat
Steps 5 and 6 to change the function codes through the entire pattern.
Insert A New Code
Occasionally, you may need to insert additional function codes in a pattern. A new
code can be inserted by sewing normally up to the desired stitch, stopping the
machine, then selecting Teach to enter a code.
•
The new code is executed the next time the pattern is sewn.
•
To make the new code take effect in the current run of the pattern,
after inserting, manually execute a trim and needle change. You can
also Float backwards a few stitches and, when you start sewing
again, the machine automatically executes the new color change.
•
If you know the necessary stitch numbers, you can also insert all
new codes with the machine in Float mode.
BENS Operation Guide - 12/99 Sewing 3-21
Teach While Sewing Screen