Barudan BENS, Operation Manual

Page: 69 / 103

Sewing
Only patterns stored in the memory can be sewn. The following tools are
used to sew a pattern.
Drive Mode
Sewing is done from Drive, the operational mode of the machine.
•
Drive mode is entered by pressing the Drive softkey. The indicator
light above the Drive softkey stops flashing and lights steadily when
the machine is in Drive mode.
•
Placing the machine in Drive mode also marks the pattern origin.
This position is recorded and can be recalled using the Standby
feature if power is shut off during sewing.
Start/Stop Bar or Buttons
The Start/Stop bar or Start and Stop
buttons are the devices that
actually start and stop the sewing.
Depending on the model, a
machine has either the bar, or
buttons.
•
Cylinder bed models
have Start and Stop
buttons located between the heads.
•
Flat bed models have a bar located under the sewing table.
To begin sewing, move
the bar to the left or push
the green Start button. To
stop sewing, move the bar
to the right or push the
red Stop button. Always
stop sewing before turning
the power off on the
automat.
3-6 Sewing BENS Operation Guide - 12/99
Drive
Softkey