Barudan BENS, Operation Manual

Page: 85 / 103

Inserting a New Function Code with Teach While Sewing
1. Select a pattern. Press the Memory softkey and use the jog keys to
move through the pattern list.
2. Press the Memory softkey again, to close the pattern list.
3. Press the Drive softkey. The light above the key is on, indicating the
machine is in Drive mode, ready to sew.
4. Move the Start/Stop bar to the left or press the green Start Button to
begin sewing.
5.
When the BENS reaches the stitch where you want to insert a function
code, move the Start/Stop bar to the right or press the red Stop
button to stop sewing.
6. Hold down the Teach softkey for approximately three seconds, until
the BENS beeps.
The Teach screen displays, showing the current stitch number. Above
the current stitch number, the code to the left of the arrow is the
current function code.
A zero displays, indicating that a function
is not currently assigned to this stitch. The
flashing code to the right of the arrow
indicates the new code that will be
assigned.
7.
Use the menu keys to change the code as
desired.
•
Press A, below the Previous Function
icon, to select the code before the
flashing code.
•
Press B, below the Next Function icon,
to select the code after the flashing
code.
A dark box displays behind the code to the right of the arrow,
indicating that it is being changed from the original.
NOTE: See page 3-17 for a list of function codes.
8. When the desired code displays, press D, below the Execute icon, to
save the new function code. The BENS beeps, and the dark box no
longer displays behind the changed code.
9. Press the Teach softkey to exit the Teach screen.
NOTE: The newly inserted code will be executed the next time the
pattern is sewn.
3-22 Sewing BENS Operation Guide - 12/99
Memory
Softkey
Drive
Softkey
Teach
Softkey