Barudan BENS, Operation Manual

Page: 41 / 103

Patterns in Memory
There are 10 locations available for pattern storage in the 261,000 stitch
internal memory. A pattern stored in memory can be sewn or programmed.
Pattern List
Pressing the Memory softkey displays the Pattern List. In the example below, the list
shows three patterns in memory, and the number of stitches in each.
•
The large number at the top left of the
screen identifies the selected pattern.
In the Pattern List, the selected pattern
has a box around it.
•
Empty locations are shown in the list
with a series of dashes across the
name and stitch count areas. If an
empty memory location is selected,
its number flashes at the top left of the
screen.
•
Available stitches in memory is
shown below the list.
Use the jog keys to move through the Pattern
List.
•
The up and down jog keys move one
pattern at a time.
•
The left and right jog keys move to the previous/next page of the list.
Pattern Characteristics
The Pattern Characteristics screen shows
information about a pattern in memory or on
floppy disk. Pattern Characteristics for patterns
on floppy disk are accessed from the Read menu
(see page 2-3). Pattern Characteristics shows the
following information.
PASS
Distance between the start and
end points, shown as horizontal
and vertical values, measured in
tenths of millimeters.
2-10 Memory Operations BENS Operation Guide - 12/99
Pattern List Screen
Pattern Characteristics Screen
Memory
Softkey