Barudan BENS, Operation Manual

Page: 83 / 103

4. Use the menu keys to change the code as desired.
•
Press A, below the Previous Color icon, to select the code before the
flashing code.
•
Press B, below the Next Color icon, to select the code after the
flashing code.
NOTE: Available codes correspond to the way Teach was selected. If
Teach was held for three seconds, all function codes are available. If
Teach was pressed once, only color codes are available. See the table on
page 3-17 for a list of function codes.
5.
When the desired code is displayed,
press D, below the Execute icon, to
accept the change and move to the next
code in the pattern.
6.
Repeat Steps 4 and 5 to move through
all codes in the pattern.
NOTE: If you don’t need to change
additional codes, press the Teach softkey
after making the last change, to exit the
Teach menu. Changes made in Teach are
accepted even if you do not advance all
the way to the end of a pattern.
The BENS beeps when there are no
more codes in the pattern.
Sewing Method
Use the sewing method to change existing function codes while a pattern is sewing.
When teach is activated in Drive mode, the machine sews the pattern, stopping at each
code instead of executing it, so you can change the code if necessary.
Changing Colors while Sewing with Teach
1.
Press the Memory softkey and use the jog keys to move through the
pattern list. Select a pattern.
2. Press the Memory softkey to close the pattern list.
3. Press the Drive softkey. The light above the key is on, indicating the
machine is in Drive mode, ready to sew.
4. Press the Teach softkey, to Teach color codes only. The light above
Teach is on, indicating Teach is active.
3-20 Sewing BENS Operation Guide - 12/99
Teach Screen
Memory
Softkey
Drive
Softkey