Operation the measuring system
52
PETRO 3003 VOLUTANK Operating Instructions, Software version pyramid 2.5.19, BA 151014 (04.12.2020))
4.5
Operation with data transfer from OBC
If the data is transferred from the OBC (on-board computer), the basic proce-
dures apply, as described in sections 4.1 to 4.4.
This section explains the differences using some typical operations.
In the case of deliveries over the collector, only parallel levies are descriebt
here. Serial deliveries are also possible. They differ from the parallel deliveries
only in the choice of the delivery type. In this case, the delivery from the se-
lected chambers does not take place simultaneously, but one after the other
(see also section 4.3.3.2).
4.5.1
Order data
4.5.1.1
Receiveing order data
The order data is sent from the OBC to the vehicle. To do
this, the driver must initiate data transmission at the OBC.
The data for the next order is then transferred.
The current status of data transmission is shown in the display.
Data transfer has started.
The data was taken.
