Bartec VOLUTANK Petro 3003 Operating Instructions Manual Download Page 42

Page: 42 / 118

Operation the measuring system
40

PETRO 3003 VOLUTANK Operating Instructions, Software version pyramid 2.5.19, BA 151014 (04.12.2020))

4.3.3.3

Part delivery

If compartments have only been partially emptied during the delivery process,
you can end the delivery process as "calibrated" or "uncalibrated".

"Calibrated" end to delivery process

If the collector is not empty, you will be asked about draining the system.
If you answer "YES", the collector will be emptied and the end to the delivery
process will be "calibrated".

"Uncalibrated" end to delivery process

If you press "NO", you will be prompted again as to whether your final decision
is for a "calibrated" or "uncalibrated" end to the delivery.

If you answer "YES", the collector will not be emptied and the end to the de-
livery process will be "uncalibrated".

Press "NO" to return to the previous screen.

Summary of Contents for VOLUTANK Petro 3003























































































































Search results

Summary of Contents for VOLUTANK Petro 3003

Reviews:

Related manuals for VOLUTANK Petro 3003

Brands by name

Popular brands

Bartec VOLUTANK Petro 3003, Operating Instructions Manual

Search results

Summary of Contents for VOLUTANK Petro 3003

Reviews:

Related manuals for VOLUTANK Petro 3003

Brands by name

Popular brands