System monitoring
109
PETRO 3003 VOLUTANK Operating Instructions, Software version pyramid 2.5.19, BA 151014 (04.12.2020)
If an error occurs during an active delivery, causing this delivery to be inter-
rupted, the event display window containing the relevant error message ap-
pears for 20 seconds.
You use the
softkey to acknowledge messages that are displayed in this
window. The “Events” window is automatically closed after 20 seconds.
The error symbol is then displayed in the information line as long as the error
is still present.
For more information on an error displayed in the information line, you can
open the event display manually.
Error messages are not cleared until the cause of the error has been removed.
As long as the error is still active, an exclamation mark is displayed next to the
error message.
Maybe in the event display more than one error are displayed.
Use the arrow-keys to select the individual messages
If you request help with an error from your service centre, you must enter the
five numbers that are displayed at the bottom right of the Events window.
These help the service center to pinpoint the error.
In order to note several error codes you have to select the individual messages
with the arrow keys.
If the seal switch is open, the event display does not appear for 20 seconds if
an error occurs. In this case, you must open the event display manually.
Information about
the selected error
Error code of the
selected error
