Bartec VOLUTANK Petro 3003 Operating Instructions Manual Download Page 13

Page: 13 / 118

Basics

PETRO 3003 VOLUTANK Operating Instructions, Software version pyramid 2.5.19, BA 151014 (04.12.2020)

3.2.3

Icons for data handling

The following icons are used to monitor the data handling and will appear in
the display above the info line.

Symbol

Meaning

Response data is provided for transmitting

Modem is switched on

Modem is switched on, connection has been established

Receiving data

Sending data

Online Service connection via FTP server is active

Bluetooth interface is active

Bluetooth connection established

Scheduled data available

Scheduled data processed

3.2.4

Operation with trailer

If the vehicle is configured to operate with a trailer, in addition to the Icons for
data handling , the following symbols can be displayed.

Symbol

Meaning

Trailer docked

Communication with trailer available

Communication with trailer interrupted

Trailer undocked

Delivery from the trailer

When attaching or detaching the trailer, you must log it on or off in the Additional
Functions Menu (see section 6.18).

Summary of Contents for VOLUTANK Petro 3003























































































































Search results

Summary of Contents for VOLUTANK Petro 3003

Reviews:

Related manuals for VOLUTANK Petro 3003

Brands by name

Popular brands

Bartec VOLUTANK Petro 3003, Operating Instructions Manual

Search results

Summary of Contents for VOLUTANK Petro 3003

Reviews:

Related manuals for VOLUTANK Petro 3003

Brands by name

Popular brands