If the DPF auto regeneration inhibit switch
set to the "Auto regeneration inhibit
mode," set it to the "Auto regeneration
mode."
Press the DPF parked regeneration
switch.
Parked regeneration starts and the
regeneration icon changes from blinking to
lighting.
When the regeneration completed, the
regeneration icon disappears.
■
In PM accumulation "Level 3":
Important
If ignoring the parked regeneration
requirement and continuing traveling or cutting
work in PM accumulation "Level 3", PM
accumulation level enters "Level 4".
If still continuing traveling or cutting work, you
will not be able to operate this machine for
regeneration.
Important
Automatic regeneration can not be activated
in PM accumulation "Level 3".
Perform parked regeneration immediately.
These are the statuses in PM
accumulation "Level 3".
"Excessive PM3" appears in the monitor
display.
Pressing an arrow key changes the
display to "CORRECTIVE ACTION:
Start DPF Parked Regeneration
immediately".
The LED (yellow) lights up.
The engine output is limited at 50%.
6.
7.
8.
1.
･
･
･
1
1
1 of 2
<
NEXT
>
HIDE
FMI 15
E x c e s s i v e P M 3
SPN 3701
C : 1
1 of 2
<
NEXT
>
HIDE
FMI 15
C O R R E C T I V E A C T I O N :
S t a r t D P F P a r k e d
R e g e n e r a t i o n
i m m e d i a t e l y
SPN 3701
C : 1
2
2
27gtuu-006
Parked Regeneration_003
1
LED (yellow)
2
Arrow key
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Set the throttle opening to 0% (idling).
Press the DPF parked regeneration
switch.
Parked regeneration starts and the
regeneration icon changes from blinking to
lighting.
When the regeneration completed, the
regeneration icon disappears.
2.
3.
4.
5.
6.
7.
GM2810A
Description of Functions
Page 4-34
Engine