
Change the parameters.
To add a parameter
Use the arrow keys to highlight the
parameter to be added, and then
press the Enter key.
ENGINE SPEED 1
DRIVERS DEMAND ENGINE TORQUE
ACTUAL ENGINE TORQUE
PERCENT LOAD AT CURRENT RPM
1Y
ACCELERATOR PEDAL POSITION 1
ENGINE DESIRED OP SPEED
ENGINE COOLANT TEMPERTURE 2
FUEL RATE
THROTTLE POSITION
vjgml4-014
Custom Setup_003
A number appears at the right of the
selected parameter. This number
indicates the display order for the
parameter
ENGINE SPEED 1
DRIVERS DEMAND ENGINE TORQUE 9
ACTUAL ENGINE TORQUE
PERCENT LOAD AT CURRENT RPM
1Y
ACCELERATOR PEDAL POSITION 1
ENGINE DESIRED OP SPEED
ENGINE COOLANT TEMPERTURE 2
FUEL RATE
THROTTLE POSITION
vjgml4-015
Custom Setup_004
To deselect a parameter and remove it
from the list of displayed parameters
Highlight the parameter, and then
press the Enter key.
ENGINE SPEED 1
DRIVERS DEMAND ENGINE TORQUE 9
ACTUAL ENGINE TORQUE
PERCENT LOAD AT CURRENT RPM
1Y
ACCELERATOR PEDAL POSITION 1
ENGINE DESIRED OP SPEED
ENGINE COOLANT TEMPERTURE 2
FUEL RATE
THROTTLE POSITION
vjgml4-015
Custom Setup_005
3.
[1]
a.
b.
[2]
a.
Check that the number at the right of
the parameter disappeared.
ENGINE SPEED 1
DRIVERS DEMAND ENGINE TORQUE
ACTUAL ENGINE TORQUE
PERCENT LOAD AT CURRENT RPM
1Y
ACCELERATOR PEDAL POSITION 1
ENGINE DESIRED OP SPEED
ENGINE COOLANT TEMPERTURE 2
FUEL RATE
THROTTLE POSITION
vjgml4-014
Custom Setup_006
After the settings have been applied,
pressing the menu key once returns to the
main menu, and pressing the key again
returns to the 1-up/4-up display screen.
Automatic Scan
With "AUTOMATIC SCAN", the 1-up display
can be set to automatically scroll through the
selected parameters one by one.
Press the menu key.
After the main menu appears, use the
arrow keys to highlight "SETUP 1-UP
DISPLAY", and then press the Enter key.
b.
4.
■
1.
Description of Functions
GM2810A
Description of Functions
Page 4-17
Monitor