Baroness GM2810A, Owner'S Operating Manual, Page: 109 / 155

Mower Deck #1
Start the engine, and then raise the mower
decks.
Stop the engine, and then remove the key.
Lift the mower deck at the front.
1
to41g1-002
Mower Deck #1_001
1 Mower deck
Remove the cotter pin and hardened
roundhead pin inserted at a, and then insert
them at b.
1
2
a
b
c
ahk5df-002
Mower Deck #1_002
1 Cotter pin
2 Hardened roundhead pin
Follow the steps below to remove the rotary
knife.
Use the square pipe from the included
tools to secure the rotary knife so that it
does not turn.
Remove the two bolts, spring washers
and washers used to install the rotary
knife.
Remove the knife guide.
Remove the rotary knife.
1.
2.
3.
4.
5.
[1]
[2]
[3]
[4]
1
6
2
3
4
5
to41g1-007
Mower Deck #1_003
1 Square pipe
2 Rotary knife
3 Bolt
4 Spring washer
5 Washer
6 Knife guide
Important
The tightening torque for the knife mounting
bolt is 104 - 134 N-m (1,060.49 - 1,366.40 kgf-
cm).
Install the rotary knife.
For installing the rotary knife, reverse the
removing procedure.
Mower Decks #2/#3
Swivel the mower deck.
Start the engine, and then raise the mower
decks.
Stop the engine, and then remove the key.
Lift the mower deck at the front.
1
x9s1w3-005
Mower Decks #2/#3_001
1 Mower deck
6.
1.
2.
3.
4.
Maintenance
GM2810A
Maintenance
Page 6-9
Adjustment and Replacement