manualshive.com logo in svg

Baroness GM2810A, Owner'S Operating Manual, Page: 58 / 155

Share
Download
Baroness GM2810A Owner'S Operating Manual Download Page 58

Use the arrow keys to highlight the item to
be changed, and then press the Enter key.
A plus appears at the right of the currently
selected items.

1

CHANGE  ENG  OIL

CHANGE  ENG  OIL  FILTE
CHANGE  HYD  OIL
CHANGE  HYD  OIL  FILTE
CHANGE  AIR  CLEANER

unpc8m-008

Reset Reminders_003

1

Plus

The remaining time for the selected item
appears.

CANCEL

RESET

CHANGE  ENG  OIL

REMAINING

5 H

unpc8m-009

Reset Reminders_004

To reset the remaining time to the
specified time, press the Enter key.
"RESET SERVICE REMINDER?"
appears.
To reset, press the Enter key.
To cancel resetting, press the menu
key.

NO

YES

RESET  SERVICE

REMINDER?

unpc8m-010

Reset Reminders_005

The screen for selecting the item appears.

3.

4.

[1]

[2]

5.

Modify Reminders

With "MODIFY REMINDERS", the
replacement time period for consumables
can be specified.
The replacement time period is not
configured at the factory.
Configure as necessary.
The replacement time period should be in
accordance with the maintenance schedule.

Press the menu key.
After the main menu appears, use the
arrow keys to highlight "SERVICE
REMINDERS", and then press the Enter
key.

3

1

2

SERVICE  REMINDERS

SELECT  UNITS
ADJUST  BACKLIGHT
ADJUST  CONTRAST
UTILITIES

unpc8m-006

Modify Reminders_001

1

Menu key

2

Arrow keys

3

Enter key

Highlight "MODIFY REMINDERS", and
then press the Enter key.

RESET  REMINDERS

MODIFY  REMINDERS

atwh69-005

Modify Reminders_002

￭

1.

2.

GM2810A

Description of Functions

Page 4-22

Monitor

Summary of Contents for GM2810A




























































































































































Reviews:

No comments