Baroness FS900, Service Manual, Page: 58 / 163

Caution
Before starting pressure measurement, make
sure that there are no people around the
machine.
Caution
For the pressure gauge and hydraulic hose,
use devices capable of withstanding at least
30 MPa (306.43 kgf/cm
2
) (4,350.98 psi).
Note:
The forward side measuring port elbow is
located on the front side of the brush frame in
the main body center area.
Remove the screw cap from the forward
side measuring port elbow.
Prepare a pressure gauge for high pressure
measurements.
3
2
1
4
g5t8is-028
Forward_002
1 Forward side measuring port elbow
2 Screw cap
3 Brush frame
4
Pressure gauge for high pressure
measurements
Secure the pressure gauge for high
pressure measurements.
1.
2.
3.
Secure the pressure gauge for high
pressure measurements with a band or the
like.
2
1
g5t8is-029
Forward_003
1
Pressure gauge for high pressure
measurements
2 Band
Raise the bucket and lock the cylinder lock.
(See the Owner's Operating Manual.)
Caution
The sling position is not at the frame center.
Hold the handle firmly and measure the oil
pressure.
1
g5t8is-030
Forward_004
1 Main body frame sling installation area
4.
5.
FS900
Hydraulic system
Page 4-30
Measurement