Baroness FS900, Service Manual, Page: 128 / 163

Adjusting the Bucket Lid
Adjust the contact surface between the bucket
and lid.
Caution
Refer to the Tightening Torque Table.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening, etc.
Adjust the lower gap between the bucket and
the lid by tightening the adjustment screw
with the lid fully pressed down.
Adjust the upper gap between the bucket
and the lid by tightening the adjustment
screw so that the gap is 1 mm (0.039 in).
1
3
4
5
2
y3iw5c-001
Adjusting the Bucket Lid_001
1 Bucket
2 Lid
3 Upper gap
4 Adjustment screw
5 Lower gap
1.
2.
Important
If an abnormal amount of force is applied to
the bucket lid frame, adjust the force using the
adjustment screw.
Adjust the cylinder adjustment area so that
the distance indicated by the arrow is 20 mm
(0.787 in).
1
3
2
y3iw5c-002
Adjusting the Bucket Lid_002
1 Cylinder
2 Adjustment area
3 Bucket lid frame
3.
FS900
Operating Machine and Mower Units
Page 7-10
Adjustment