Baroness FS900, Service Manual, Page: 40 / 163

Fitting with parallel pipe threads (O-ring sealing
system)
6j9lyk-001
Fitting with parallel pipe threads (O-ring sealing system)_001
Check to see if the O-ring is properly fitted
to the groove of the main body.
Check to see that the thread part, seat
surface of O-ring port and O-ring are free
from flaws or foreign matter.
Before fitting, apply hydraulic oil or grease
to the O-ring.
For fitting, screw in by hand till the main
body touches the other side lightly, then
tighten securely with a tool such as a
spanner.
Adjustable Elbow
jf65lf-001
Adjustable Elbow_001
1.
2.
3.
4.
￭
Make sure that the positions of the nut,
washer, and O-ring are correct.
If they are in the correct positions, the
washer is pressed into the upper end of
the groove of the main body.
1
2
3
4
jf65lf-002
Adjustable Elbow_002
1 Main body
2 Lock nut
3 Washer
4 O-ring
Make sure that the thread portion, sheet
surface of the O-ring port, and O-ring are
not contaminated with foreign objects.
Apply oil or grease to the sheet surface
and O-ring before installation.
1
2
jf65lf-003
Adjustable Elbow_003
1.
2.
FS900
Hydraulic system
Page 4-12
General instructions