Baroness FS900, Service Manual, Page: 141 / 163

Inspection and repair of each section
Brush
Change of Brushes
Important
If the brush operation height is inadequate,
cores will not be properly collected.
Important
If the left and right sides of the brushes are at
different heights, pickup will be irregular, and
the brushes will wear unevenly.
Important
Replace all brushes. Otherwise the weight will
become unbalanced and vibration may occur.
If the clearance between the rotary brush tips
and the brush frame cannot be adjusted to
approximately 5 mm due to brush wear,
replace the brushes.
Move the machine to level ground, and
then apply the parking brake.
Shift the bucket up/down lever to the "UP"
position to raise the bucket.
ON
OFF
OPEN
UP
CLOSE
FREE
PURESS
DOWN
DOWN
UP
1
A
5c6vly-001
Change of Brushes_001
1 Bucket up/down lever
A Up
Stop the engine.
1.
2.
3.
Important
To keep the position of raised bucket, be sure
to lock it with the cylinder lock.
Remove the cotter pin and round head pin,
and then lower the cylinder lock.
2
1
3
xsi3tb-001
Change of Brushes_002
1 Cotter pin
2 Round head pin
3 Cylinder lock
Insert the round head pin through the holes
in the cylinder lock, and then install the
cotter pin.
2
1
3
xsi3tb-002
Change of Brushes_003
1 Cotter pin
2 Round head pin
3 Cylinder lock
4.
5.
Operating Machine and Mower Units
FS900
Operating Machine and Mower Units
Page 7-23
Inspection and repair of each section