Baroness FS900, Service Manual, Page: 103 / 163

Adjustment
Brake
Adjustment of Brake
Danger Danger
If the brake wire is cut, the machine will be
unable to stop. This would be extremely
dangerous.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
If the brake is not sufficiently effective, adjust
the brake wire.
Important
Adjust to reduce the play in the brake lever as
much as possible so that the brake does not
drag when the lever is released.
Adjust the foot brake by tightening the
brake wire adjustment bolt.
If there is too much play in the brake
lever, the braking power is reduced and
the brake pedal feel is light.
If there is too little play in the brake lever,
the braking power is increased and the
brake pedal feel is heavy.
2
1
3
nfzln9-007
Adjustment of Brake_001
1 Brake wire
2 Adjustment bolt
3 Brake lever
Start the engine and drive to check the
following.
Make sure that heat is not generated in
the brake area.
Make sure that the left and right brakes
are equally effective.
1.
･
･
2.
･
･
Danger Danger
It would be extremely dangerous and may
result in an unexpected accident if the left and
right brakes are not equally effective.
If the left and right brakes are not equally
effective, make fine adjustments with the
adjustment bolt on the brake wire.
Break-in of Brakes
If the brake shoes or brake pads are worn,
replace them with new ones.
Immediately after replacement, drive to
break in the brakes if the effectiveness of the
brakes is low.
While driving, lightly operate the brakes to
break in the contact areas.
3.
￭
Main body
FS900
Main body
Page 6-5
Adjustment