9. GUI – System Settings
The GSM pin code input menu is displayed. The current con
fi
gured PIN code is indicated next to Pin input
fi
eld. If the code is
still the same, it is not necessary to enter the PIN code again. If it is a PIN code, continue with next step.
Image 9-6
Enter PIN code
2. Enter the 4 digits of the pin code and select
APPLY
and click
OK
.
9.3
IR control
Overview
•
•
•
9.3.1
Broadcast address
About broadcast address
Broadcast address is a common address that can be set on the projector. That can be “0” or “1”.
Any command coming from a remote control programmed with that common address will be executed.
How to the broadcast address
1. In the main menu, select
System Settings
→
Communication
→
IR Control
.
Image 9-7
Communication menu, IR control
The IR control menu is displayed.
Image 9-8
IR control menu
2. To change the broadcast address select the radio button of your choice.
The following choices are possible:
-
Generic IR (address 0)
-
Barco broadcast IR (address 1)
3. Select
APPLY
and click
OK
to apply the changes.
82
R5906151 XDL 17/04/2018
Summary of Contents for XDL-4K75
