Barco XDL-4K75, User Manual

Page: 59 / 117

8. GUI – Installation
8. GUI – INSTALLATION
Overview of features
•
Con fi guring the lens, zoom-focus
• Con fi guring the lens, shift
• Orientation
• Warping
• Blending
• Laser illumination
• 3D projection
8.1 Con fi guring the lens, zoom-focus
What can be done?
Once a lens has been installed in the projector, you can fi ne-tune the projected image.
Zoom - Focus
1. In the main menu, select Installation → Lens → Zoom focus .
Image 8-1
Lens menu, Focus & Zoom
2. Use the ▲ or ▼ key to zoom the lens in or out.
Use the ◄ or ► key to focus the lens to far or near.
Image 8-2
Zoom and focus adjustment
8.2 Con fi guring the lens, shift
What can be done?
The image can be shifted by using the vertical and horizontal lens shift.
Lens shift is only possible when lens shift is calibrated. Please refer to the lens calibration section in System
Settings → Lens Calibration menu.
Vertical and Horizontal Shift
1. To change the position of the projected image, select Installation → Lens → Shift .
R5906151 XDL 17/04/2018 55