![background image](http://html1.mh-extra.com/html/barco/xdl-4k75/xdl-4k75_user-manual_4264417072.webp)
8. GUI – Installation
The Blend – Mask menu is displayed.
Image 8-37
Blend & Mask menu
2. To enable blending, put the
Enable
switch to the right. The color of the switch becomes blue when enabled.
3. To project masking lines on the screen, put the
Show lines
switch to the right. The color of the switch becomes blue when
enabled.
4. Determine the start position of the mask (1) for the masking height and width, together with the desired size of the mask (2) to
determine the width of the masked area.
When the blending lines are activated, you will get a visual indication of the screen of the installed blending area.
1
2
Image 8-38
1
Start position (mask)
2
Blending width
5. Select one of the four starting positions values with the arrow keys and con
fi
rm.
6. Use the arrow keys or remote digits to change the value of the mask and con
fi
rm.
7. Repeat this process for the desired width/height value.
8. Repeat this process for all other desired sides.
Do not forget to disable the Show lines button after you achieved the desired blend zone.
68
R5906151 XDL 17/04/2018
Summary of Contents for XDL-4K75
