Barco XDL-4K75, User Manual

Page: 66 / 117

8. GUI – Installation
Image 8-20
Symmetric Bow correction.
4. To enable a symmetric adjustment, make sure the Symmetric slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
5. Select the side of the picture to be bow corrected, con fi rm by pressing enter, and use the arrow keys to adjust the angle and
linearity (length) of the vectors.
The angle is adjusted by the up and down arrows on the remote control, and the linearity is adjusted by the left and right arrows.
The correction will occur symmetrically on each side of the center of the highlighted side.
When corrected with the values in the image above, the picture will occur as shown below.
Repeat this step for all sides of the picture that has to be corrected.
Image 8-21
Symmetric bow correction
Non symmetric bow correction
1. Enter the Bow menu, and disable the symmetric slider.
2. There are now two vectors on each side of the picture that can be adjusted individually. Select each of them, and adjust angle
and linearity (length) individually to obtain the correct correction.
The angle is adjusted by the up and down arrows on the remote control, and the linearity is adjusted by the left and right arrows
Image 8-22
Left vector of the upper side of the picture.
62 R5906151 XDL 17/04/2018