Barco TransForm SCN, User Manual, Page: 37 / 61

4. Operating
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
_______________________________________________________________________________________________
4-14
Maximum DDC Timing T
RANS
F
ORM
SCN forwards DDC data from a DDC capable displaying device towards
the data source. In case there is no monitor connected to the T
RANS
F
ORM
SCN or
that it does not provide DDC data, the T
RANS
F
ORM
SCN may create a DDC signal to
request a special resolution, please refer to section 4.1.2 DDC .
Timing Select a resolution for DDC from the list.
Figure 4-10
T
RANS
F
ORM
SCN web interface – encoder timing – properties with auto detection enabled (left) and disabled (right)
If you connected an analog source and the loop through is connected to a digital display,
the timing settings entered above are used to create the digital signal. Therefore, if you are
not satisfied with the quality of the image of your digital displaying device, re-check the
timing settings please.