3. Getting started
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
3-6
3.2.4
Remote Pointer
To operate the screen of the host PC its local mouse and keyboard can be used. Furthermore to remotely control
the screen also the mouse and keyboard of the master PC can be used. Mouse and keyboard signals are trans-
ferred over the LAN to the T
RANS
F
ORM
SCN. The T
RANS
F
ORM
SCN transforms the signal to a USB signal and sends it
over a USB connection to the host computer. For the USB connection a suitable USB cable is included in delivery.
Connection
Plug the USB connector type B (more quadratic shape) of the cable into the
USB
jack [11] of the T
RANS
F
ORM
SCN.
Plug the other side of the USB cable (connector type A, flat rectangular shape) into an USB jack of the host PC.
Figure 3-5
connection of remote pointer – USB cable
The master PC and the T
RANS
F
ORM
SCN have to be connected to the same LAN.
Please refer also to section
for the usage of remote pointer.