Barco TransForm SCN, User Manual, Page: 32 / 61

4. Operating
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
4-9
All interface settings
On the all interface settings screen the settings for default gateway IGMP Version and the server port can be
found and a user defined name can be assigned.
IP Default Route
IP default gateway T
RANS
F
ORM
SCN uses in case that DHCP is disabled
Force IGMP Version:
Auto
IGMP v1
IGMP v2
IGMP v3
Auto should be selected, in user mode the used version is displayed
same version is used as in the network
version 1 is used
version 2 is used
version 3 is used
Server Port
Port for communication (commands, changing parameters, etc.) between
T
RANS
F
ORM
SCN and master PC
Default is 6666
Custom name
user defined name can be entered here (max. 31 characters), please see below
Use the default board name
checked Default setting, the standard name BARCO TransForm SCN Encoder
is used. TransForm SCN is displayed on top of the page.
unchecked A user defined name can be assigned to the T
RANS
F
ORM
SCN.
Behind the standard name the user defined name is displayed in
brackets.
Figure 4-7
T
RANS
F
ORM
SCN web interface – Network – All interface settings in administration (left) and standard user (right) mode