Barco TransForm SCN, User Manual, Page: 19 / 61

3. Getting started
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
3-3
The back
15 13 13 13 16 14 18 17
13 ventilation slots
14 LAN adapter (10/100 Mbps) with the following LED signals:
15 yellow LED 1 Ethernet link
on – 100 Base-TX connection
off – 10 Base-TX connection
16 green LED 2 Ethernet activity
on – valid link
blinking – traffic
off – no valid link
17 LED: power OK
18 power connection
Figure3-2
rear view of T
RANS
F
ORM
SCN
In the middle of the rear there is the network adapter [14] to connect to the LAN. On the right hand side there
are the power connection [18] and a LED [17] indicating power OK.
To disconnect TransForm SCN from the power supply the DC output connector of the desktop
power adapter has to be pulled of the power connection [18]. Therefore the back panel has
to be easily accessible!