4. Operating
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
4-7
4.3.3
General settings
The general settings screen lists general information of the T
RANS
F
ORM
SCN.
Default Version
Default firmware version
[Active] Upgrade Version
Active firmware version. If an error occurs while installing a new firmware version
the T
RANS
F
ORM
SCN is operated with the default firmware version instead.
DSP Release
Release version of the DSP
Build date
Build date of the DSP
FPGA Code version
version of the FPGA Code
Compression
compression type
Maximum Channels
number of maximum channels
Maximum Total Bitrate
number of maximum total bitrate
System Uptime
uptime since the last reboot
System Load
load average within different time intervals: last 1 minute, 5 minutes, 15 minutes
e.g
average:
1.00,
1.06,
1,07
Build Information
used firmware version and build date of this version
Figure 4-5
T
RANS
F
ORM
SCN web interface – general settings