Barco ImagePRO, User Manual

Page: 19 / 126

R5906167 /00 ImagePRO – 4K Video Processor
19
Cable
Description
Notes
RJ-45 Ethernet cable For use with external controllers or Web
Interface and EMTS GUI For remote connections;
customer supplied
AC power cord AC Power, 7 foot, 10A For power connection; 1
cord supplied
Power cord and line voltage selection
The ImagePRO – 4K is rated to operate with the following specifications:
• Input Power: 100-240 VAC, 50-60 Hz
• Power Consumption: 2A maximum
The ImagePRO – 4K performs line voltage selection automatically. No user controls are required. The AC
power cords must be accessible so that they can be removed during field servicing.
WARNING: When used above 230 volts, a UL listed line cord rated for 250 volts at 15 amps must
be used and must conform to IEC-227 and IEC-245 standards. This cord will be fitted with a tandem
prong-type plug.
The rear panel ON/OFF switch does not disconnect the unit from input AC power. To facilitate
disconnection of AC power, the power cord must be connected to an accessible outlet near the unit.
Building Branch Circuit Protection: For 115 V use 20 A. For 230 V use 8 A.
General