Barco iD PRO R600+, Owner'S Manual

Page: 49 / 179

6. Advanced
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the sharpness
6.4.1.6 Gamma
How to change the Gamma
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Gamma
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Gamma
6.4.1.7 Phase
Phase adjustment
A bad phase adjustment will result in bad transitions and sometimes noise (text can end to be unclear).
How to change the Phase ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Phase
7. Press ENTER
On the screen appears now a sliderbox (image 6-22)
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Phase
Image 6-22
6.4.1.8 Noise reduction
How to change the Noise reduction ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
R5976874 ID PRO R600/R600+ 21/09/2006 43