Barco iD PRO R600+ Owner'S Manual Download Page 124

Page: 124 / 179

7. IQ Network

Image 7-18

Start Meetings control

The meeting control is started and positioned on the desktop, through out the meeting it will allow to :

•

Accept requests interactively : a request for a desktop sharing from a client PC must be accepted on the iCon server, a dialog
box is displayed on the iCon asking to accept or decline the desktop sharing request

•

Deny all requests : all request are denied

•

Accept all requests automatically : desktop sharing is always accepted at the iCon (server) without prompting for confirmation

•

Notify end of meeting at : allows to set a reminder at expected end time of the meeting

Image 7-19

How to configure the Server settings ?

1. Go to the server icon in the lower task bar of the desktop and click the right mouse button.

A menu is displayed

2. Select

Settings

A dialog box is displayed allowing to select different tabs
- Networking
- Dropzone, see Dropzone chapter
- Exchange

118

R5976874 ID PRO R600/R600+ 21/09/2006

Summary of Contents for iD PRO R600+




















































































































































































Search results

Summary of Contents for iD PRO R600+

Reviews:

Brands by name

Popular brands

Barco iD PRO R600+, Owner'S Manual

Search results

Summary of Contents for iD PRO R600+

Reviews:

Brands by name

Popular brands