![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134078.webp)
6. Optical spares and servicing procedures
Image 6-17
Examples of misalignment of the folding mirror
C
AUTION
:
Bad alignment of the folding mirror can cause damage to the lens or to the seals on the DMD!
Overview of adjusting possibilities of the folding mirror
This overview only applies to a front table configuration and describes what is seen on the screen.
When the image is shifted in one direction, a black border appears at the opposite side
The adjusting screws are sealed with glue: before trying to turn the screws, warm up the glue using a hair
dryer until it becomes weak. Now the screw can be turned without risk of breaking off the screw head.
The nominal position of the folding mirror is the position where the top plate of the folding mirror is at the
same level as the top of the three studs.
Image 6-18
74
R59770097 ID H250 / H500 15/05/2007
Summary of Contents for iD H250
