![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134075.webp)
6. Optical spares and servicing procedures
7
8
9
10
11
12
2
1
3
4
5
6
Image 6-11
Indication
Description
1
DLP fix plate
2
DLP aperture
3
DLP aperture gasket (to prevent dust from falling on the DLP chip)
4
DLP interposer
5
DLP chip
6
insulation plate
7
formatter board
8
insulation plate
9
heatsink
10
backer plate
11
stud
12
nuts (stud retainers)
6.4.2
Replacing the DLP chip
Introduction
The DLP chip replacement is a very delicate operation and must by done by trained persons only! Always carefully and attentively
follow the procedures and make sure no dust or dirt can fall onto the DLP chip!
C
AUTION
:
Always check the type of the delivered DLP chip. The formatter has to be set in order to match the
new DMD!
R59770097 ID H250 / H500 15/05/2007
71
Summary of Contents for iD H250
