![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134072.webp)
6. Optical spares and servicing procedures
8. Use the numeric keys on the remote or
↑
,
↓
,
←
,
→
to input the serial number of the lamp
9. Use
←
or
→
to select
Accept.
The runtime will be reset and the serial number will be saved
W
ARNING
:
Lamp runtime reset can only be done by a Barco authorized technician.
Removing the lamp
Do not remove a lamp if the projector or lamp is still hot!
1. Switch off the projector and unplug the mains connection
2. Remove the back cover of the projector — See "Removing the rear cover", page 13
3. Disconnect the power plug of the lamp
Image 6-6
Unplug the power connector of the lamp
4. Pull the lamp locking handle to unlock the lamp which you want to replace
Image 6-7
Unlock the lamp to be replaced
5. Slide out the lamp
Image 6-8
Slideout the lamp
68
R59770097 ID H250 / H500 15/05/2007
Summary of Contents for iD H250
