![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134096.webp)
7. Mechanical spares and servicing procedures
Image 7-23
Location of the
fan connector board
, on top of the power supply
7.3.2
Replacing the lamp fans
Necessary tools
•
screwdriver Torx T10
•
slotted screwdriver 6mm
How to remove the lamp fans?
1. Remove the lamp cover
2. Unplug the fan connector (J1 of J2 on the fan connector board)
3. Remove the three screws fixing the lamp fan to the lamp cover. Beware of the nuts!
Image 7-24
Fixing screws of lamp cover fan
4. Slide out the fan to remove it
7.3.3
Replacing the lamp top fans
Necessary tools
nut spanner 7mm
How to remove the lamp top fans?
1. Unplug the fan connector (J3 of J 5 on the fan connector board)
2. Remove the nuts fixing the fan to the projector
92
R59770097 ID H250 / H500 15/05/2007
Summary of Contents for iD H250
