![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134053.webp)
5. Electronic spares and servicing procedures
•
image processing: the input data is converted into a bit plane output format to drive the DMD image bus
•
control to and feedback from the color wheel
•
control of the lamp power supply
•
brilliant color mode: increase brightness through the use of the white segment and spokes of the color wheel
•
color coordinate adjustment (dynacolor)
•
DC-DC convertors to provide the various voltages
Image 5-39
Formatter board (without DMD!)
5.6.2
Replacing the formatter
Necessary tools
nut spanner 5.5mm
How to replace the formatter?
Do not proceed when you are in a dusty environment!
Dust will fall onto the DMD.
1. Remove the lens holder — "Removing the lens holder", page 99
2. Remove the two top nuts. Be careful not to drop the springs!
Tip:
Look at the position of the nuts: they must be in the same position when remounting a new formatter (focus !).
Image 5-40
Lens holder and formatter: top view
R59770097 ID H250 / H500 15/05/2007
49
Summary of Contents for iD H250
